SALE: use coupon code UCOBD to save 5% on your next purchase.

Latest VAG COM VCDS 16.8 VAG 16.8 Cable Support Long Coding

Latest VAG COM VCDS 16.8 VAG 16.8 Cable Support Long Coding
Latest VAG VCDS 16.8 VAGCOM 16.8 VAG Diagnistic Interface 16.8

Latest VAG16.8 cable VCDS 16.8 software Vcds Firmware 1.96 with Original ATMEGA162 + 16V8B + FT232RL Chips Support Long Coding

Latest VAG VCDS 16.8 VAGCOM cable:


Software version: vcds 16.8

Firmware Version: 1.96
Original Full-chip Edition: ATMEGA162 + 16V8B + FT232RL
Language :english 
Support system:Windows XP, Vista, 7, 8, and 8.1 (both 32-bit and 64-bit)

VAG VCDS 16.8 with Firmware 1.96 Highlights:

1. VAG Newest Version: VCDS Software Version: 16.8  Firmware Version: 1.96  
2. Original Full-chip Edition: ATMEGA162 + 16V8B + FT232RL  
3. High quality original brand new IC production, Equipped with repair chip: STC12C2052
4. After installation has been activated to support all systems diagnostics (including K1,K2,CAN,UDS)

Vagcom VCDS 16.8 New Features: 


-Support for MLB2 platform cars (HEX-NET interface recommended)
-Support for 2016 and early 2017 model cars
-Greatly expanded the amount of DTC Freeze-Frame data dsiplayed
-Improvements in Advanced Measuring Value Selection Window
-Display of factory identifiers instead of arbitrary location numbers
-Support for Six-Digit security access codes
-HEX-NET Turbo and other speed optimizations
-Optimized low-level timing routines and CPU core affinity
-Major firmware enhancements for HEX+CAN and Micro-CAN interfaces
-Improved UDS mapping speed and reliability when subchannels are present; progress indicators.
-Fixes SRI reset in newer Crafter instruments.
-New ASAM data and Label Files
-Many other small fixes and improvements introduced in Beta versions 16.3-16.7


Vagcom VCDS 16.8 New Add:


1. Control module unit information
2. Read fault codes 004.01
3. Output test 005
   Selective output test 005
4. Basic settings 006
5. Clear DTCs 004.10
6. Close control module 022
7. Pairs of coding control module (brush hidden) 007 (service 1A)
   008 (Service 22) From the station control module 007 coding (service 1A)
   008 (Service 22) Read measured value block 08 010.02 (KWP1281)
8. Advanced measurement reading
9. channel read 010.01
10. matching 012 014 (long)
11. Log (Known under KWP-2000 * Coding II) 015.01
12. View readiness 020.01 Guided ready state settings
13. security access 015.02
14. All supported DTCs
15. Common OBD-II function
16. Fault environmental data
17. Dual K-Line Support 7-PIN code 020.07
18. Upgrade to the latest fault code library
19. Direct CAN line diagnosis (Need to support diagnostic cables CAN line diagnosis)
20. Modes of transport 1001.03 (on)
    1001.04 (off) (Need to support diagnostic cables CAN line diagnosis)
21. Advanced measurement block
22. Support for dual engine control module

 

Vagcom 16.8 Quick Guide

VCDS software download the installation file from this page
Double-click the downloaded installation file, follow the steps to install the software correctly VCDS
You must VCDS software installed on your computer's hard drive!

If you run directly from other media VCDS software, the software may not run correctly
You can use a CD or USB flash drive to copy files to install VCDS on your computer hard drive you want to install, and then install it.

The appropriate diagnostic cable to connect the computer to the vehicle and
Turn the ignition switch of the vehicle, but it is not necessary to start the engine.
VCDS software program running

Click the [System Configuration], and then select the correct communications port
Click [Test] to confirm VCDS program can use the correct communications port, find diagnostic cables
Then click [Save]

You can now use all the features of the program VCDS. Ensure VCDS software can reliably access all the control modules that you have a vehicle to view the fault code. See the VCDS diagnostic system for vehicle applications list
You can also visit our website to see if VCDS software upgrade.

 

Vagcom 16.8 Note:


1. Version 16.8 must be used to Ross-Tech's HEX-, KEY-, KII-, or Micro-CAN series of "smart" diagnostic cables
2. You can not be used elsewhere to buy or produce their own diagnostic cable
3. VCDS Chinese program is installed by default in the following directory: C: Ross-Tech VCDS-ZHS 
4. If you are using more than 7 operating system Windows Vista or Windows, please do not install the VCDS in the system Program Files directory

 

Vagcom 16.8 Packing List:


1 x Vag com 16.8 diagnostic cable
1 x CD with VCDS 16.8 software 

 

VAG COM VCDS 16.80 FAQ:

 

Q: Does VCDS 16.800 support pc internect connection?

A: yes,but not suggest.

 

Q: VAGCOM VCDS 16.800 support run RT software directly? 

A: no,run modified software from us,working perfectly same to RT software.

 

Q: VAG VCDS 16.800 support longcoding full functions? 

A: yes.full functions.

 

Q: Do the VCDS 16.800 need change pc time? 

A: no need.

 

Q: What's the VCDS 16.800 main chips ? 

A: Original Full-chip: ATMEGA162 + 16V8B + FT232RL  , add self recovery chip: STC12C2052

 

Q: VAG VCDS 16.800 support all systems ? 

A: yes, including K1,K2,CAN,UDS 

Write a review

Note: HTML is not translated!
    Bad           Good

Login For Better Price

  • Views: 1371
  • Product Code: DF440
  • Reward Points: 66
  • Availability: In Stock
  • $65.99
  • Price in reward points: 6599

Orders will be sent out in 48 hours in working days. Weekend orders will be sent out on Monday. If you need the item urgently, please contact us

Tags: vag com 16.8, vcds 16.8, vcds 16.8 cable