Xentry Connect for Mercedes Benz Xentry Connect Diagnostic Tool
New Generation Mercedes-Benz Xentry Connect Xentry Diagnosis Tool Xentry Connect
Xentry Connect SD connect successor With Xentry Tab Support Wireless for Mercedes-Benz
XENTRY Connect is the successor of SD connect and replace of the SD Connect and Star compact3,will continue to be connected directly to the vehicle as before. Diagnosis (XENTRY Diagnostics, XENTRY DAS, SDscan, etc.) will in future run directly on the XENTRY Connect.
This is enabled by a complete PC core in the XENTRY Connect.
The operation of the diagnosis software takes place on the XENTRY Tab via a remote connection.
XENTRY Connect offers the following product benefits:
Integrated multiplexer and diagnosis functionality
Close-to-vehicle diagnosis for increased system stability
Comprehensive diagnosis of all areas and categories
Please Pay Attation to The Tip of Use XENTRY Connect:
1. The XENTRY Connect multiplexer is not compatible with Star Diagnosis compact4 and can only be used in combination with XENTRY Tab or a corresponding standard PC.
2. There is ONLY hardware and software (multiplexer, cables, software SSD inside MUX) in this order, has NO xentry tab inside, please make sure you have the laptop to use it
3. If you want the xentry connect together with the xentry tab, you can check Xentry Connect with Xentry Tab
XENTRY Connect Additional Information:
The XENTRY Tab cannot be ordered individually but only in combination with the XENTRY Connect.
Alternatively to an XENTRY Tab you may also work with a standard PC which must fulfill the following technical minimum requirements.
XENTRY Connect Operating-system Requirements:
Recommendation Windows 7 (32bit)
Windows 7 Professional (32bit)
Processor 1,1 GHz Dual Core
RAM 2 GB Memory
Hard disk drive min. 30 GB
USB interfaces min. 2x USB 2.0 (for external BD drive)
Network LAN or WLAN
Display recommended min. size: 13.3*
Recommended min. resolution: 1366*768 pixels
Net Framework version 4.0
Xentry Connect for Mercedes Benz Display:
Xentry Connect Packing List:
1 x Xentry Connect multiplexer
1 x Cables set